I am currently assisted my son's school in installing the new WMS 2012 using Dell Wyse for each station. But during the process the school's internet (which fails a lot since its old and will hopefully be replaced soon) went down and the stations became
unusable. The school does have a few older WMS 2010 installed wth N-Computing in some classrooms, and when the network went down the stations still functioned minus the internet. Is there a station setting that needs to be adjusted to allow the stations to
function minus the internet?
↧
Stations stop working when school internet goes down
↧
WMS2012 Premium + 20 HP T200 zero clients
Hi to all,
I successfully installed WMS2012 Premium on this hardware:
CPU: Xeon E5-1620
24GB RAM
VGA 2 X NVIDIA GT420
Then I installed all drivers, UR1 and drivers for zero cliets.
Network Tab appears in Multipoint Manager. All 20 clients successfully assigned to Multipoint Server.
Why in Station Tab shows only 14 stations? How can I view all 20 stations?
Thanks in advice,
↧
↧
Disable Windows Key
Has anyone successfully disabled the Windows key in Multipoint 2012? I have tried changing the scancode registry key per microsoft's recommendation, but this doesn't have any effect when the server is in Normal mode. If I put the computer into Maintenance
mode the scancode regkey work as expected.
↧
What is the minimum "extent" for WMS 2012 Disk Protection?
I tried to enable disk protection on my WMS 2012 server and got this error message:
The size of the extent is less than the minimum
I assume that this is referring to disk space. How much disk space is needed?
Peggy Thrasher
↧
Multipoint Server 2012 Premium Multiple Logon Issue
I have created an AD account to use for students that will be testing. After logon, the account launches the browser and opens to the homepage which I have set to the online testing webpage. Everything works great when I logon to the first client. Every
client after that will not launch a the web browser. For testing, I logged onto 3 clients (I'll call them A, B and C) with the one account and the web browser would only launch on one at a time. If I have the browser open on client A, it will not let me open
a browser on client B or C, until I close the browser on client A. I can then open the browser on B or C, but only on one. Is this a bug or is it some limitation of MPS?
↧
↧
WMS 2012
How we will know if the software is a licensed or not?
↧
WMS2012 using Wirelless
Hi i have question about WMS 2012 connection on articel they just say 3 way to connect from WMS client to WMS server
1 . direct connect using DB9 port
2. USB connect Using USB hub
3. LAN Connect using lan connection
my question is
that way possible to connect from client to server via Wirelless Connection ???
if it possible what kind client must use
↧
Specifying a different license server in Windows Multipoint Server 2012
I have a Multipoint Server 2012 Premium, member of a domain.
Another server in my domain is running the license server, active and running.
How can I use my remote license server with Multipoint Server 2012?
Must I need to buy different RDS-CALs for my Multipoint Server?
How can I uninstall the RD licensing service running in multipoint server?
↧
Disk Protection error when trying to enable - Multipoint Server 2012 Premium
Hi
I get the error when trying to enable disk protection - see picture attached.
S
↧
↧
Support SLI or CrossFire in WMS2012 zero client ?
Hi everyone, I want know about did WMS2012 support Nvidia SLI or ATI CrossFire with two external graphics card
in zero client or not ?
If so, those can increase the zero client video performance or GPU gonna helpful to decrease the machine CPU usage in WMS2012 ?
Thanks.
↧
Automatically Provision Auto-Login Accounts (WMS2012)
So I just found these WmsCmdlets the other day, and figured I would whip up a simple script to automate the provisioning of auto-logins. We use these to great effect in all of our computer labs, but it's always a drag spending the 10 minutes or so setting up the accounts. In our environment we use generic student AD accounts, but this script would work just as well with local accounts.
The only thing that is needed to use this script is that the accounts need to name sequentially e.g. student1, student2, student3, etc.. and have the same password. If there is any interest this script could easily be modified to hand command line arguments and be a little more flexible, but for now I designed this to work with my setup.
Function Convert-Base64 ([string]$arg1)
{
[System.Convert]::ToBase64String([System.Text.Encoding]::UNICODE.GetBytes($arg1))
}
# Modify these vars with your account info
$Domain = "DOMAIN" # Use "." for local accounts
$WmsUser = "username"
$WmsPass = "P@ssword"
# Start Script
Import-Module WmsCmdlets
$Stations = Get-WmsStation
$Count = 1
ForEach ($Station in $Stations.Id)
{
$User = $Domain + "\" + $WmsUser + $Count
Set-WmsStation -StationId $Station -EnableAutoLogon -AutoLogonUserName $(Convert-Base64 $User) -AutoLogonPassword $(Convert-Base64 $WmsPass)
if ($?) { $Count++ }
else { Write-Host "There was an Error!" ; break }
}↧
WMS 2012 and Touchscreen Support over Network Clients
Hi all,
I recently setup some virtual machines to operate with Dell Wyse E02 network clients. I purchased touch screen monitors to go with the zero clients, thinking that the E02's USB input would recognize the monitor as a keyboard and mouse. Upon testing the scenario, I found that the touch screen capabilities do not work.
Is there anyway to configure WMS so that touch screens may be used over virtual desktops & network clients?
Thank you so much in advance for the help!
↧
Multipoint 2012 stations connected but not connected
Greetings,
I have a WMS2012 server with 8 Wyse E02 clients. All clients connected normally, except for two of them. Both units that do not connect show up in the unassigned window as "not connected." All stations were working normally until they were assigned a different station number. Now, others still work fine, however, two of them will not connect to mulitipoint. The server see them, but I cannot get them to connect.
Latest drivers are loaded for video and wsye devices. I'm thinking that they are blocked or otherwise prevented from connecting to MPS. I've reset them back to factory power on state with no luck.
Thanks for the help.
↧
↧
Zero Client trial Waiting for the Assigned Host
I've setup a trial MultiPoint 2012 server in Hyper-V using the trial license key noted in the trial download instructions. I installed the additional drivers which will allow Zero Clients (using ThinGlobal MultiPoint Ethernet) to connect to the MultiPoint server, installed the required Windows Update to support additional clients, and once installed and rebooted a few times the MultiPoint Manager displays the Network Stations tab.
Using Network Stations I scanned for clients and the test Zero Client was displayed, I assigned that to the MultiPoint server and it shows in the Assigned Client list at the bottom of the screen, but with a Status of Not Connected. On the Thin Client's screen it shows "Waiting for Assigned Host", whereas I was expecting it to show the Windows MultiPoint client login screen (never used this before so not sure).
I've created Users, made sure the server has up-to-date patches, and even re-installed the server from scratch but has made no difference. The MultiPoint server is definitely in Station Mode and no errors are appearing in the Event Logs. The server though is only licensed with the Trial server license, but under the Home tab it shows there are no client licenses. Am I not able to connect clients just with the trial server license, not much of a worthwhile trial if that is the case?
Thanks
↧
New Version of WMS
Hi Everyone
Anyone heard of any talk of a new version of WMS or an upgrade to V12? I think it's overdue.
There seems to be very little chatter from Microsoft.
cheers
↧
Outlook 2010 connected through exchange server on Multipoint Sever 2011 Station
We have various stations running on a Multipoint Sever 2011. One of the stations uses Outlook 2010 with email account connected through an exchange server. The other stations have local Outlook email profiles. When the stations with local profiles have Outlook working, the station with the exchange server email profile is unable to connect to the exchange server. If the local profile stations close outlook, the connection to the exchange server succeeds. Please advise.
↧
USB drives showing to all users
Our university has implemented Multipoint Server 2011 (soon upgrading) with Ncomputing L300 thin-clients for all students and faculty. Everything runs smoothly, however, we are seeing an issue where plugged in USB drives are appearing to all logged-in users opposed to just the user plugging into their terminal. As you can imagine, this can become a serious issue where students are able to view faculty data and vice versa. Even a plugged-in smart phone has appeared on the network. Where can we modify this setting so that drives do not appear for all users?
We currently utilize Active Directory and users plug their flash drives directly into the L300 Thin-clients. This must continue to occur because students need to save assignments and they print often.
↧
↧
Zero Clients Blank Screen
Hello there, We have deployd a Multipoint Server 2011 Premium Evaluation in the following Conditions:
Server . Dell Power Edge 1950 2xXeon Dual Core Processors, 32 Gb Ram and 147 GB HDD
Zero Client is Atrustm320 (Lan Based) 12 UnitsEvery config seems fine, the Multioint Manager says that stations are connected and the keyboard and mouse respond but the screen is blank on all Clients Monitors. Any help on this??
Many thanks,
AldirleyG
↧
Upgrade of WMS 2012 to full Production
Hello All,
I have a question and although I have searched, I still cannot find a resolution. I have downloaded and installed WMS 2012, 180 day trial version and need to upgrade to the full production version. I have Volume License agreements but where in the world can I input this information to upgrade to the NON-trial version?
I'm new to thin clients and need a bit of help. Thank you for your time.
RETBOB
↧
MultiPoint Server 2012 has no options to switch from Console Mode to Station Mode
We have a customer who is using MultiPoint Server 2012. I see no subcategory for this server operating system so I thought I should just post it under Server 2012 since that is what it is running.
They are wanting to use the Wyse Zero Client with MultiPoint Server to connect people to terminals on the WMS. All the options for Station Mode are completely missing except the option to create a station template. We can create the station template but the option to create a station based on the template is missing.
↧