Compatibility of Office 365 in Windows Multipoint Server
the multipoint-server shell has suddenly stopped working
please help!
hi every time i open the server i am greeted by this message:
the multipoint-server shell has suddenly stopped working.
the details are as follows:
Problem Event Name : APPCRASH
Application Name : SRCShell.exe
Application Version : 6.1.1600.5
Application Timestamp : 4eb465b8
Fault Module Name : Station.dll
Fault Module Version : 6.1.1600.5
Fault Module Time Stamp: 4eb465b5
Exception Code : c0000005
Exception Offset : 0000000000053994
OS Version : 6.1.7601.2.1.0.16.56
Locale ID : 13321
Additional Information 1: f4fb
Additional Information 2: f4fbb3bbd4a03087da47c581553379
Additional Information 3: Se3f
Additional Information 4: Se3fd17c819664388032530a0fae66b
what should I do? please help!!
Multipoint server 2011 Maintenance mode
Multipoint Server and Mouse without borders
Windows Multipoint 2012 Premium - No Remote Desktop License Server available
Hello,
I'm having an issue with a new installation of multipoint premium 2012. I have 3 other servers running without any issue, but this new one won't let me connect through a regular rdp session, an admin session works perfectly.
Also, connecting as a station at the server itself doesn't work (pressing the 'B'), i can go into console mode as long as i get the message my graphics card is not up to date, but once these drivers are updated, i can't log in locally anymore, i have to connect through an admin rdp session.
The error i get when trying to connect is:
The external session has ended because there are no Remote Desktop License servers available that can provide a license. Contact your administrator
(Could be the correct english translation is different, this is translated from dutch.)
The server is not connected to a domain as this one will be placed somewhere where there isn't an active directory, but either connecting it to an AD or not makes no difference.
Any help would be greatly appreciated.
Setting up Multipoint Client through PXE and no disk.
Hello! Has anyone been able to get a hard driverless laptop to boot using PXE solely with the Multipoint Server 2012?
I have 1 client connect to the server through an unmanaged switch. When I PXE boot it, it detects the server, but hangs there. Has anyone worked through this that could provide some step by step insight?
Thanks.
error dashboard multipoint 2012 premium
Hello
I downloadedand installed thetrial
Multipoint2012Ipurchased the
HPT200zeroclientwhen Iwant to"TakeControl"or"desktopproject"(theDashboard) forone orall users,I receivethe following error message
"The TakeControlFailedaction.MultipointCan notconnect to
thesession"
respectively
"Projectfailed.Unabletoconnect tosession"
All otheroperating correctly
I want to usethisOSin an
educationalsystemmade upof 3
x 10systemeofworkstations.
The twoactionsareneeded
in teaching.
UserfulMultiSeatwhereI testedit worksok.HoweverI want touseWMS2012.
Can you help me?
yours sincerely
PatrasescuMarinica
error dashboard multipoint 2012 premium
Hello
I downloadedand installed thetrial
Multipoint2012Ipurchased the
HPT200zeroclientwhen Iwant to"TakeControl"or"desktopproject"(theDashboard) forone orall users,I receivethe following error message
"The TakeControlFailedaction.MultipointCan notconnect to
thesession"
respectively
"Projectfailed.Unabletoconnect tosession"
All otheroperating correctly
I want to usethisOSin an
educationalsystemmade upof 3
x 10systemeofworkstations.
The twoactionsareneeded
in teaching.
UserfulMultiSeatwhereI testedit worksok.HoweverI want touseWMS2012.
Can you help me?
yours sincerely
PatrasescuMarinica
T200 WMS 2012 Network / USB Drivers
The link from this blog post to download the WMS2012 zero client drivers seems to have vanished. Is there anyone out there that has a copy of the installers for the T200 Network / USB drivers?
http://blogs.technet.com/b/multipointserver/archive/2013/01/31/wms-2012-zero-clients.aspx
The specified domain either does not exist or could not be contacted
I have two multipoint servers running Multipoint Server 2012 Premium with 20 HUB400 Zero clients connected on the lan. A couple of times a day (?) when a client attempts to login they receive a message "The specified domain either does not exist or could not be contacted". Any other clients on that server will receive the same message if they try to login. Clients that are already logged in work fine. There appears to be a periodic task that runs that clears this condition. Usually the problem fixes itself within 10 minutes.
Clients on the other server can login at this time, so it is not a problem with my network/domain.
Does anyone else see this?
Peggy Thrasher
Duplicate Clients displayed in MultiPoint manger
I have several thin clients connected on a multiPoint server each client is configured with a user account and connected.
open multiPoint manager and it show that the 6 of the clients are connected twice to the server but only 1 instance has a user account connected to it.
If use the identify station on either duplicate or original it points to the same device.
to clear the problem i have unassigned the device from the server and reasigned it, this works but the next day i logged into the server and experienced the same problem as duplicate device showing again.
how do i stop this from happen again?
Implementing Windows Multipoint on 2 servers
Hello,
I'm about to install a classroom of 32 students and 1 teacher with the Windows Multipoint Server.
I know for each server, you can add 20 computer on a LAN. So i decided to put 2 servers for all the computers.
But I wanna know how to configure the server in order to be able to control all the 32 computers by 1 teacher ?
Thank you for your answers.
Best Regards,
Multipoint Server 2012 / SSD incompatibility ??
Hello,
to define our environment, we use a MS6200 From HP + 9 zero client T150 from HP.
We were using WMS2011 Premium without problem and we decided to pass to the new WMS2012.
all was working fine until we decided to use WMS2012 with SSD Drive.
For information we use sasmung 840 evo 120gb model : MZ-7TE120
All stations are detected in the manager but we have no display.
We made fresh install on the SSD, but also a clone of the HDD wich was working correctly.
Same issue, no display on the T150; sometimes 1 zero client is working, but after reboot same issue.
Any idea ?
Take Control Error Win Server Multipoint 2012 premium
GoodDay
I have installed WindowsMultipoint2012Premiumand I use Direct-Video-Conetedstation.
When I want to use Dashboard, it worksfine, but when I want to"TakeControl"- it appears the following error message;
"The Take Control Failed action.Multipoint can not connect tothe session "
Same if I use the"Project":error messageis:
"Project failed.Unable to connect tosession"
Ido not usevirtual machine.I do not useWMP2012virtual.
It is installedas the operating systemonan Inteli7with16GBRAM.ConnectionusingNVIDIAQuadro400 +USB HUB+monitorandthe secondconnectionis aZeroClientHPT 200.
I reinstalledWMP2012several times.Tackecontrolsometimesworkedand sometimes not.I do not knowwhy.
Pleasehelp me,
What should I do?
Thanks
Patrasescu.marinica@yahoo.ro
Virtual Desktops and Stations on the Same MPS 2012 Premium Server
Running MPS 2012 Premium connected to a Windows 2012 Server Essentials domain. I have 4 users that require custom apps that will not work properly with a shared TS environment like MPS. So I want to enable the Virtual Desktops in MPS 2012. I have installed a dedicated Samsung SSD that will store the images along with 32Gb of RAM and dual Xeons.
My question is can I run Virtual Desktops and use the standard MPS shared desktop concurrently? Of is it either/or?
Thanks for any input.
Ken
USB Periperals on the Multipoint Server
My first post here.
I was wondering if anyone had difficulties using certain USB devices on the Multipoint hubs, such as DVD drives or graphics tablets? Even with the drivers installed on some of them, I seem to be unable to use them to any effect. I have had multiple third parties enquire me about the graphics tablets, as their users require them for drawing/writing foreign languages. Any feedback, advice or solutions would be extremely helpful, and highly appreciated.
Thanks in advance
JC
Multipoint 2012 connecting over a WAN
clean install- pc has no operating system
connect to internet in windows multipoint server
NCOMPUTING L230 PROBLEMS
how could I download ncomputing l230 windows 8 64 bit software ??????????????
REPLU QUICK
PLZ