I have big issues with my two Multipoint servers running 2011, in that they crash on pretty much a daily basis. I introduced this kit to upgrade our school ICT suite, and in testing, the system worked very well albeit with just two users.
Now that I have implemented the bigger solution onto more powerful hardware, the system is unstable and is becoming pretty much unusable to the point that we may scrap it after less than a year and at considerable cost.
My setup is:
Dell Server T420, Twin Xeon processors, 32Gb memory, 2TB disk RAID array, NVidia GeForce GT640 2Gb Video
Clients are all Wyse E02 zero clients over our gigabit LAN - no USB clients in use
Running MS Multipoint Server 2011 Premium
I am running 7 clients on each server although intended to take it up to 15 on each. But have halted deployment whilst the servers are so flaky.
There does not seem to be any consistency in the crashing either - some are BSOD with varying error messages, some just reboot, some just hang with no output to any monitor, whether directly attached to the server or not.
Is there anyone out there that has been through setting up Multipoint 2011/Wyse E02 installations and may have some pointers on where to look for solutions?
Thanks.